S13 inner tie rod upgrade

[Steinkrunk]

I was looking at the option for inner tie rods and it looks like our bigger brothers have much beefier..ahem...rods than we do. Sooo I was wondering, do any of the s14/z32/z33 inner rods jive with stock outers? Any info on this subject and which one is the best of these three (im guessing the z33's) would be GREATLY appreciato. Google just returned a **** ton of links for SPL parts and I dont got $300 to shell out for outers just yet.

[d3m14n]

i still have your tension rod braces. i dont think ill be using them.

z32s work with spl outters.
adjustable s14 inners (ikea formula) work with s14 ends.

[Steinkrunk]

none work with s13 ends? Or will any of these ends (s14/z32/z33) work in s13 knuckles? I just dont see the point in paying ~$50 for s13 inners when s14/z32/z33 are all the same price.

[sr20sean]

im going to be running s14 inners and outers once i get my knuckles.

[Steinkrunk]

Originally Posted by sr20sean

im going to be running s14 inners and outers once i get my knuckles.

once you get s14 knuckles? Im guessing s13 knuckles= s13 inners and outers ONLY so thats what ill get.

[brewster240]

you can use s14 inners/outers with s13 or 14 knuckles

[ninety1two40]

Powered by max sells inner rods, they seem to be the best. They work with S14 outers.

[sr20sean]

Originally Posted by Steinkrunk

once you get s14 knuckles? Im guessing s13 knuckles= s13 inners and outers ONLY so thats what ill get.

im not sure if im going to get modded s13 or s14 knuckles yet. probably just sticking to s13. but yea as mike said you can use s14 on s13 or s14.

[Black240ct]

the threads on s13's are different then s14, im almost positive,

and all aftermarket companies that make outers or inners use the s14 thread pitch.

z32's are shorter i believe so you can use a z32 and s14 outer and not run into an issue of bottoming the inner into the outer, with your stock knuckles.

s14 and z33 inners are longer then z32 and s13, and all three are a bit, beefier then s13 inners, although stock s14 are pretty skinny

right now i have s14 inner and outer on a stock knuckle and i am like a half turn of the inner bottoming out and its aligned.

[allmtoreg]

you want these http://www.gtfactory.jp/cms/e107_plu...topic.php?3220